Portfolio

SRD-99 Recording system

SRD-99 RECORDING SYSTEM The high performance, cost-effective SRD-99  data logger is designed for the monitoring and recording of temperature, pressure, humidity, level, pH, redox, flow, etc. Features Graphical data logger. Up to 8 inputs 0/4 – 20 mA ó Pt100/Pt500/Pt1000. 1 input for logging start control. USB Host port for data storage key. RS-485 / Modbus RTU. Graphical display. The device comes equipped with 8 temperature inputs (P100/500/100) or current inputs in 0/ 4÷20 mA standard, one digital input, a USB port for data storage, and an RS-485 MODBUS RTU communication port.The [...]

By |April 7th, 2021|Categories: , |Tags: , |Comments Off on SRD-99 Recording system

Wireless transmitters

WIRELESS TRANSMITTERS The TekOn Electronics WIRELESS TEMPERATURE TRANSMITTER is specifically designed to meet the most stringent operating requirements in industrial process environments. Due to their small dimensions they can be installed in the sensor connection head, DIN Form B, insted of traditional terminal blocks.

By |April 7th, 2021|Categories: |Tags: |Comments Off on Wireless transmitters

Wireless PLUS temperature transmitters

WIRELESS PLUS TEMPERATURE TRANSMITTERS This system consists of a transmitter and a Gateway with Modbus RTU connection to PLC,SCADA,PC,HMI and 8 configurable analog outputs. The PLUS system is designed to monitor 4/20 mA and 0..10V signals from sensors such as pressure, level, temperature, PH, humidity.etc. Features 4 configurable analog inputs ( 0.. 20 mA or 0.. 10V) 3 configurable digital outputs : RF , external control for power on 4 Km communication distance with 868 Mhz and 128 Bits AES encrypted Internal temperature sensor, battery indicator Operating temperature -30ºC [...]

By |April 7th, 2021|Categories: |Tags: |Comments Off on Wireless PLUS temperature transmitters

Wireless DUOS temperature transmitters

WIRELESS DUOS TEMPERATURE TRANSMITTERS Features Long distance range (5 km LoS) Mesh Network topology No external parts (IP67) Dual Probe – Air and product PC configuration The TekOn Electronics Wireless DUOS Temperature Transmitter is the perfect wireless temperature solution for monitoring applications. Equipped with an intelligent dual probe transmitter that allows the user to monitor not only the air temperature, but also to have product temperature simulation, thanks to the second built-in probe.TekON Electronics – a specialist in temperature measurement for over 20 years - has [...]

By |April 7th, 2021|Categories: |Tags: |Comments Off on Wireless DUOS temperature transmitters

Portable measurement and calibration equipment

PORTABLE MEASUREMENT AND CALIBRATION EQUIPMENT Portable Thermometers Features Input: Type K Thermocouple (Models with 1 or 2 inputs). Measurement range: -50 +1.300°C (58 +2000° F). Resolution: 1 6 O.1° C/F, automatically selectable. Manual zero correction. Shockproof protective casing. Wide variety of adaptable thermocouple models. Maximum recorded value memory function. Data Logger Thermometer Features Input: Type K Thermocouple. Range: -200 +1370°C. Peak and valley function /(records maximum and minimum values). Storage capacity: 16.000 readings. Full memory indication. Programmable logging [...]

By |April 7th, 2021|Categories: , |Tags: , |Comments Off on Portable measurement and calibration equipment

Mod. PyroCouple Infrared measurement

MOD. PYROCOUPLE INFRARED MEASUREMENT Instruments intended to be incorporated into the process. Stainless steel construction, Diam. 18 x 85 mm. Features Mounting thread: M 16/100. Protection rating: IP65. Temperature range: 0/250°C (Other upon request). Output signal: 4/20mA, type J, K thermocouple, etc. Cable length: 1 mt. Accuracy: ±1 % of the reading, or ± 1ºC, whichever is greater. Repeatability: ± 0,5 % of the reading, or ± 0,5ºC%, whichever the greater. Emissivity: Fixed at 95 (Upon request, adjustable emissivity). Spectral response: 8 to 14 [...]

By |April 7th, 2021|Categories: |Tags: |Comments Off on Mod. PyroCouple Infrared measurement

Clamp electric heaters

Clamp electric heaters Features Clamp design: Especially suitable for extruders. Wide range of models: With mica support (with or without sheath), ceramic support, hermetics. Helicoidal, high-power, standard, or encapsulated. Option for built-in thermocouple. Specifically designed for injection nozzles.

By |April 7th, 2021|Categories: |Tags: |Comments Off on Clamp electric heaters
A SERVICE THAT MAKES THE DIFFERENCE

TRUST THE EXPERTS

With almost 60 years of experience in manufacturing electronic instrumentation and temperature control probes, we can provide you with comprehensive advice, regardless of your industry sector.

Go to Top